[1]姜晨龙,司 慧,刘小虎.基于ADAMS的清洁小车齿轮传动系建模及仿真[J].黑龙江农业科学,2011,(01):118-121.
JIANG Chen-long,SI Hui,LIU Xiao-hu.Modeling and Simulation of Transmission System ofClean Car Based on ADAMS[J].HEILONGJIANG AGRICULTURAL SCIENCES,2011,(01):118-121.
点击复制
JIANG Chen-long,SI Hui,LIU Xiao-hu.Modeling and Simulation of Transmission System ofClean Car Based on ADAMS[J].HEILONGJIANG AGRICULTURAL SCIENCES,2011,(01):118-121.
基于ADAMS的清洁小车齿轮传动系建模及仿真
《黑龙江农业科学》[ISSN:1002-2767/CN:23-1204/S]
卷:
期数:
2011年01
页码:
118-121
栏目:
出版日期:
2011-01-10
- Title:
- Modeling and Simulation of Transmission System ofClean Car Based on ADAMS
- 文章编号:
- 1002-2767201101-0118-04
- Keywords:
- ADAMS; gear transmission; three-dimensional modeling; virtual prototype; motion simulation
- 分类号:
- TP391.9
- 文献标志码:
- A
- 摘要:
- 通过ADAMS平台来实现手动清洁齿轮传动系的虚拟样机建模和运动仿真，从而达到降低改进设计过程中反复制作的成本，缩短改进设计的周期。文章主要介绍了在ADAMS下建立清洁小车齿轮传动系的简化模型，并在ADAMS中施加约束和添加运动并进行动态仿真，给出了齿轮传动系在特定运动状态下位移、速度、加速度等的特性曲线，并与理论计算值进行了比较，为手动清洁车齿轮传动系的优化改进研究提供了参考依据。
- Abstract:
- Based on ADAMS，achieving virtual prototype modeling and simulation of transmission system of manual cleaning vehicle to improve the design process and reduce the cost and shorten the design cycle.This paper described the simplified three-dimensional modeling of clean car gear system by software ADAMS，imposed constraints and then added motion and conducted the dynamic simulation of gear transmission，the feature curves of displacement，velocity and acceleration of the machine under a specific motion status were obtained，and compared with the theoretical values，which could provide a reference for optimization of manual cleaning cars gear transmission.
参考文献/References:
[1]万超，司慧.多功能手动清洁车的设计及应用[J].节能技术，2008，26(151):411 - 413. [2]贾长治，殷军辉，薛文星.MD ADAMS虚拟样机从入门到精通[M].北京：机械工业出版社，2010. [3]杜连明，昃向博，王玉增，等.基于SolidEdge及ADAMS的牵引卷筒机构运动仿真[J].南京航空航天大学学报，2005，37(1):104-107. [4]袁文武，蔡慧林，任刚.基于UG和ADAMS的齿轮啮合动力学仿真[J].煤矿机械，2010，31(2):40-42. [5]柴保明，高学攀，谷兴海，等.基于ProE和ADAMS的变速器联合仿真实现[J].煤矿机械，2010，31(7):222-224. [6]李增刚.ADAMS入门详解与实例[M].北京：国防工业出版社，2006.
备注/Memo
基金项目：北京林业大学大学生创新计划资助项目(91005)第一作者简介：姜晨龙(1988-)，男，江苏南通市人，硕士，从事林业与木工机械研究。E-mail：jiang_24_good@163.com。
更新日期/Last Update:
2014-10-31