GUO Ren-ning,LI Xiao-yan,SUN Qi.Heat Transfer Enhancement Program on Underground Pipes of Greenhouse and Numerical Simulation[J].HEILONGJIANG AGRICULTURAL SCIENCES,2011,(11):107-110.
温室地埋管强化换热方案探讨及数值模拟分析
- Title:
- Heat Transfer Enhancement Program on Underground Pipes of Greenhouse and Numerical Simulation
- 文章编号:
- 1002-2767201111-0107-04
- Keywords:
- greenhouse heating; heat transfer enhancement; transversally corrugated tube; converged-diverging tube; corrugated tube; numerical simulation
- 分类号:
- TK172
- 文献标志码:
- A
- 摘要:
- 为了提高地热资源在温室供热中的利用效率,定性研究了地源热泵地埋管管内强化传热方式,针对横纹管、缩放管和波纹管为研究对象并以光滑管作参照,建立了以水为传热介质的强化传热模型,利用Fluent软件,采用simplec算法和标准k-ε模型,分析了不同的管内结构对管内传热过程的影响,并探讨其强化传热机理,从光滑管和几种强化传热管的传热特性中可得出,在研究范围内,它们的传热效果按优劣依次为横纹管、缩放管、波纹管,为温室供热地埋管的选择提供了可靠的依据。
- Abstract:
- In order to improve the efficiency of geothermal resources in greenhouse heating,the study on heat transfer enhancement of underground pipe was carried out and a heat exchanger model of heat transfer enhancement was established,which was made for the different tubes with water for heat transfer medium.The influences of different tube structure on heat transfer enhancement were studied by solving the 3D N-S equations and energy equations using the simplec method and the standard k-ε turbulence model in Fluent,and the mechanism of heat-transfer enhancement was discussed.From the heat transfer comparison graph of these three kinds enhanced tubes compared with that of the smooth tube,the order of the strengthening heat transfer effect of these three tubes was transversally corrugated tube,converged-diverging tube and corrugated tube.
参考文献/References:
[1]柴立龙,马承伟,张晓蓄,等.地源热泵温室降温系统的试验研究与性能分析[J].农业工程学报,2008,24(12):150-154. [2]左睿,蒋绿林,高伟.地热技术在温室供暖中的应用[J].安徽农业科学,2009,37(13):6139-6140. [3]宇波,王秋旺,陶文铨.波纹内翅片管换热与阻力特性的实验研究[J].工程热物理学报,2000,21(3):334-337. [4]Yu Bo,Tao W Q. Pressure drop and heat transfer characteristics of turbulent flow in annular tubes with internal wave-like longitudinal fins[J].Heat and Mass Transfer,2004,40:643-651. [5]钱颂文,朱冬升,李庆领,等.管式换热器强化传热技术[M].北京:化学工业出版社,2003. [6]刘吉普.横纹槽换热管力学性能试验研究[J].化工机械,1998,25(3):70-72. [7]黄德斌,邓先和,邢华伟.异型管内水力、传热性能的数值模拟[J].高校化学工程学报,2003,17(2):146-150.
备注/Memo
第一作者简介:郭仁宇(1956-),男,辽宁省沈阳市人,硕士,教授,从事流体机械及工程研究。